Rockford Fosgate Punch P300X1 & P1-2X10
Mono subwoofer Amplifier with Punch P1 Ported Loaded Enclosure Subwoofer Package

Rockford Fosgate Punch P300X1 & P1-2X10 Mono Punch subwoofer Amplifier with Punch P1 Ported Loaded Enclosure Subwoofer Package

Package Includes:

• (1) Rockford Fosgate P1-2x10 Dual 10" Loaded Enclosure
• (1) Rockford Fosgate P300X1 Punch 300W Mono Amplifier

Our Rockford Fosgate 10" P1-2X10 & P300X1 Loaded Enclosure Subwoofer Package includes dual, Rockford Fosgate 10" P1 subwoofers in a loaded enclosure along with the Rockford Punch 300-watt mono amplifier. Our Rockford Fosgate 10" P1-2X10 & P300X1 Loaded Enclosure Subwoofer Package includes the subwoofers, the amplifier, and a wiring kit.

Rockford Fosgate Punch P300X1 300W RMS Punch Series Monoblock Class AB Car Power Amplifier

General Features

• Punch Series Monoblock Class AB Car Amplifier
• RMS Power Rating:
• 4 ohms: 200 watts x 1 chan.
• 2 ohms: 300 watts x 1 chan.
• 1 ohm: ----------N/A-----------
• CEA-2006 compliant amplifier
• Features C.L.E.A.N. Set-up with the 10-step set-up procedure
• w/ input/output clip detection and indicator LEDs
• MOSFET power supply
• Muted turn on
• Cast aluminum heatsink
• 12dB/octave Butterworth crossover
• Stealth top-mounted control panel
• LED power, thermal, and protection indicators
• Nickel-plated captive C-clamp terminals
• Ultra-efficient Class BD circuitry to maximize amplifier power efficiency
• On-board differential inputs eliminate noise picked up by the signal cable
• Optional PLC2 remote Punch Level Control ready with input clip indicator
• Optional RFIF2SW High-level input capable with Auto Turn-On circuit (
• MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
• Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
• Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low
• DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
• Input sensitivity: 150mV - 12V
• On-board Punch EQ
• Bass: 0dB to +18dB boost @ 45Hz.
• Treble: 0dB to +12dB boost @ 12.5kHz.
• Function depends upon LP/AP/HP switch position
• Selectable crossover modes: LP / AP / HP
• Variable crossover filter: 50-250Hz
• Frequency response: 20 - 20,000Hz
• Total Harmonic Distortion: <1.0%
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H
• 8 AWG to 18 AWG speaker wire output terminals

Rockford Fosgate P1-2X10 Punch P1 Dual Subwoofer Loaded Enclosure

Enclosure Features:

• Dual 10" Loaded, Ported Box
• Solid 5/8" MDF Construction
• Front-firing tuned port
• Spring-loaded binding posts
• Complete with high-density black box carpeting
• Dimensions: 15-1/8"D x 31-1/8"W x 13-1/8"H

Subwoofer Features:

• 10" Punch Stage 1 Subwoofers
• Power Handling:
• Peak: 1000 watts total (500 watts each)
• RMS: 500 watts total (250 watts each)
• Recommended power range: 250 - 500 watts RMS @ 2 ohms
• CEA-2031 Compliant
• Klippel Verified
• Flex-fit Mounting pattern
• Proprietary spider venting/cooling technique
• StampCast basket with integrated spider venting
• Sturdy 16 gauge compound bend frame geometry
• High modulus Kevlar re-inforced paper-pulp cone
• Semi-flexible, PVC removable protective motor cover
• Multi-point high-temp/high-strength neck joint bonding technique
• Tall-profile VAST Santoprene surround for a larger surface area
• Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
• Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
• Proprietary all-metal, radially oriented compression input terminal assembly
• Optimized motor magnetics with extended pole and bumped vented backplate
• High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
• Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
• Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-10
• [Rockford Fosgate P1 Series]
• Magnet Weight: 45 oz
• Frequency Response: 23 - 250 Hz
• Xmax: 9mm
• Sensitivity: 84 dB @ 1 watt / 1 meter

⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.